This is a dimmer plug-in and is used between a standard Schuko wall outlet and lamps connected to a wall outlet by cable. The unit is rated IP 20 and can therefore be used in dry environments only. The unit is included into a Z-Wave network by a remote control, PC-software or any other kind of Z-Wave controller.
The device is a conventional leading-edge phase control dimmer with support for inductive loads such as transformers. Additionally resistive loads such as incandescent lamps or 230 V halogen lamps can be dimmed too.
 
Technical Data:

• Power rating: 230V, 50 Hz
• Maximum load:
• Incandescent lamps: 40...300W
• 230V (HV) halogen: 40 ... 300W
• Low voltage halogen with standard transformer (inductive load): 30...300VA
• Low voltage halogen with switched power supply (reactive load): no
• Fluorescent light: 30… 300VA, only dimmable lamps
• Wireless behaviour: receiver
• Z-Wave type: routing slave
• Distance: up to 100 m in field, up to 30 m in houses
• Display: multicolour-LED
• Local interaction: one button for switching, inclusion, exclusion and association
• Power supply: via 230 V power

Manufacturers Installation Manual for DUW_064398 (english)