MER_508619 is a dimmer plug-in and is used between a standard Schuko wall outlet and lamps connected to a wall outlet by cable. The unit is rated IP 20 and can therefore be used in dry environments only. The local usage is performed with a touch sensor on the device. The unit is a universal dimmer. It can dim all kinds of resistive, reactive and inductive loads. The unit is included into a Z-Wave network by a remote control, PC-software or any other kind of Z-Wave controller.
The unit will remember the last dimming state when powered on after a total power off.
 
Technical Data:

• Power rating: 230V, 50 Hz
• Maximum load:
• Incandescent lamps: 40...350W
• 230V (HV) halogen: 40 ... 350W
• Low voltage halogen with standard transformer (inductive load): 40...350VA
• Low voltage halogen with switched power supply (reactive load): 40...350VA
• Fluorescent light: 40...350VA only dimmable lamps
• Wireless behaviour: receiver
• Z-Wave type: slave
• Distance: up to 100 m in field, up to 30 m in buildings
• Display: -
• Local interaction: sensor button for switching, inclusion, exclusion and association
• Power supply: via 230 V power
• Dimensions: 120x65x38 mm (HxBxT)

Manufacturers Installation Manual for MER_508619 (english)