This Z-Wave.Me dimming Flush-Mountableconsists of standard DUWI Z-Wave hardware but located with an enhanced Z-Wave.Me firmware. The  pattress box Flush-Mountable of the manufacturer Duwi is intended to control lamps, both with resistive or inductive load.  A pattress box is needed for installation. The insert has two buttons. In order to use them for local control the Flush-Mountable needs to be completed with a switching paddle and a mounting frame of one of the Duwis switching series “Everlux” or “Arcada”. The unit is designed for use within a 2-wire system, which means that no neutral wire (blue) is needed for operations.  It will be included and controlled in a Z-Wave network from a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.The device is a conventional leading-edge phase control dimmer with support for inductive loads such as transformers. Additionally conventional resistive loads such as incandescent lamps or 230 V halogen lamps can be dimmed as well.

Compared to the standard Duwi firmware this product offers a series of important enhancements.

• Works well within networks controlled by an IP gateway
  • status changes are reported back to IP gateway in real time
  • switching paddles can be used to control scenes in gateway
• Implements the most recent advancements of Z-Wave technology Explorer Frame for network wide inclusion and automated reconfiguration of networks
• Improved routing algorithm for faster communication
• Prevention against „Ghost Nodes“ after controller reset

Further enhanced features include

• Configurable night light
• Three association groups (single click, double click, status change)
• Switching paddle can be used for control independently of local operations

Technical Data:

• Power rating: 230V, 50 Hz
• Wiring: 2-wire-system
• Maximum loads:
  • Incandescent lamps: 40...300W
  • 230V (HV) halogen: 40 ... 300W
  • Low voltage halogen with standard transformer (inductive load): 30...300VA
  • Low voltage halogen with switched power supply (reactive load): no
  • Fluorescent light: 30… 300VA, only dimmable lamps
• Wireless behaviour: receiver
• Z-Wave type: slave
• Installation: in pattress box
• Distance:  up to 30 m in buildings
• Display: Multicolour-LED
• Interaction: two buttons to be completed with switching paddle for local operation
• Power supply: via 230 V power
• Dimensions: 48mmx48mmx23mm