This wall dimmer bundle of the manufacturer Duwi is intended to control lamps, both with resistive or inductive load.  A pattress box is needed for installation. The product consists of

• the insert, which can be used with or without local control (equals DUW_064336)
  
• a special mounting plate to moount the insert into a pattress box
• a mounting frame for Duwi Everlux series , color standard white
• the switching paddle for local control of the dimmer

The unit is designed for use within a 2-wire system, which means that no neutral wire (blue) is needed for operations.  It will be included and controlled in a Z-Wave network from a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.The device is a conventional leading-edge phase control dimmer with support for inductive loads such as transformers. Additionally conventional resistive loads such as incandescent lamps or 230 V halogen lamps can be dimmed as well.

Technical Data:

• Power rating: 230V, 50 Hz
• Wiring: 2-wire-system
• Maximum loads:
• Incandescent lamps: 40...300W
• 230V (HV) halogen: 40 ... 300W
• Low voltage halogen with standard transformer (inductive load): 30...300VA
• Low voltage halogen with switched power supply (reactive load): no
• Fluorescent light: 30… 300VA, only dimmable lamps
• Wireless behaviour: receiver
• Z-Wave type: slave
• Installation: in pattress box
• Distance:  up to 30 m in buildings
• Display: Multicolour-LED
• Interaction: two buttons to be completed with switching paddle for local operation
• Power supply: via 230 V power
• Dimensions: 48mmx48mmx23mm