SSA2 (red lense) is a Siren / Strobe Alarm module introduced by FortrezZ. Integrated into the home automation and/ or security network, this siren/strobe module will deliver the audible and visual notifications you can depend on.
- Intended for use inside a Z-Wave Home Automation network as a Siren / Strobe Light Alarm.
-
Can be used in a normal, existing home’s security system with wired controllers, using Z-Wave to RS-232/485 bridge.
- Extends the range of existing Z-Wave devices in the mesh network by acting as a signal repeater.
- Uses the latest and most successful wireless home automation technology.
- Tamper proof. Uses 9V batter backup to sound alarm if AC power is disconnected / cut.
- SSA is fully programmable with Z-wave smart controllers to provide the audible and visual notifications you set for your automation and/or security network.
- Siren ONLY mode
- Strobe ONLY mode
- Strobe & Siren Mode
- SSA will sound a loud audible alarm >110dB@1m and an intense strobe lighting when an alarm signal is received from a device in the Z-Wave home network.
* FCC and Canada IC certified for 908.4 MHZ Z-Wave RF communications.
* Complies with European Test standard: ETSI EN 300 220 for 868.4 MHZ Z-Wave RF communications.
* Dimensions: 3.5” diameter x 1.25” (90mm diameter x 34mm)
* Power: 12V DC adaptor and option for 9V backup battery
* Frequency Range: 908.42MHz (US); 868.4MHz (EU)
* Distance Range: Max 100ft line of sight in unobstructed environment
* Product Weight: 0.5 lb
* Operating Temp: -10ºC (14F) to +70ºC (158F)
* System Requirement: Any Z-WaveTM enabled network and controller
* Install: With two screws using the included mounting plate.
